Handwired 69-73 1959 JMP Super Lead 100W Board,Sozo,Mallory Alan Bradley

Description

Marshall
69-73 1959 JMP Super Lead 100W Turret Board, Sozo, Mallory,Alan Bradley
This auction is for a loaded 19
69 1959 JMP Super Lead 100W
circuit board. The components are hand wired onto a handmade tag board just as was done with the originals.
The layout is the same as an original 19
69 1959 JMP Super Lead 100W
. It
was built with the correct vintage value components.
This board can be used to upgrade a reissue amp or to build a new amplifier.
Each one is built one at a time by hand. The wiring, soldering & layout are clean and
top notch components were used all the way around.
The buyer has a choice of Sozo Vintage Capacitors or Mallory 150series. If you have any questions please email me.
The detailed specs are below.
SPECS:
Sozo Vintage .022uf/ 400V, .1uf /400V
or
Mallory 150 Series .022uf/400V, .1uf/400v
NTE551 Top Hat Diode
BC Components 10uf axial 250v Bias Capacitors
BC Components 220uf axial 25v Cathode Bypass Capacitors
FF&T Axial 100uf 450v&T Axial 100uf 450v
NOS Allen Bradley carbon comp resistors used in the input, bias mix, cathode, tone stack, feedback and the cathode positions
1 watt carbon film resistors elsewhere
2 watt Metal film resistor in the bias supply position
Piher 25k bias trim pot
Cornell Dubilier CDM  47pf/500v silver mica capacitor in the phase inverter circuit
Cornell Dubilier CDM  500pf/500v silver mica  capacitor in the tone stack
Cornell Dubilier CDM  500pf/500 bright channel mix cap
Note: Due to Supply and Demand board color my vary