18" PELLET HOPPER ASSEMBLY KIT w/ Vertical Controller BY DIRECT IGNITER

Description

18" PELLET HOPPER ASSEMBLY KIT w/ Vertical Controller  BY DIRECT IGNITER
This is designed for people to make their own pellet stove at home or to replace a broken pellet stove. This kit comes with ALL the electrical components needed to make a great pellet smoker. Just attach the pellet hopper to your desired smoker pit and build appropriate Heat Deflector and Drip Tray. This is the EASIEST and CHEAPEST way to build a CUSTOM pellet smoker. These units also work with many of the common pellet stoves, such as Traeger, Pit Boss? an easy way to fix your broken pellet smoker.
What's included:
1 Pellet Hopper Body
1 Digital Control Board with meat temp sensor
1 RTD Sensor Probe
1 Meat Sensor Probe
1 200W Igniter
1 Steel Burn Pot
1 2 RPM Auger Motor
1 Auger Shaft Rod
1 Combustion/Induction Fan
Everything is fully assembled? just needs to be attached to your smoker pit and RTD properly placed and installed.  *** RTD probe placement ? RTD must be placed in close proximity to grill grate for accurate readings. RTD should not be located near or touching any direct flame or high heat***
You Must Have a Flame Guard and Drip Tray in Your Smoker for Proper Operation. These Are Not Included and Must Be Made Custom for Your Project.  Please look at a commercial pellet stove brand internals before building your own pellet stove. This will help you with understanding how to design a proper flame guard and drip tray for best results.
Description:
Has auto start/ auto light
Smoke Mode with P-MODE Settings are 1-7
Temperature Modes 200-475 degrees
High Mode- For temps above 475 degrees
Digital Display
Displays ACTUAL TEMP & MEAT PROBE TEMP
Has Toggle button to switch between meat probe temperatures and P-Mode
Has Automatic Shut Down Feature, which runs the fan motor for 5 minutes after shut down to blow out fire and ashes.
Holds temperatures to within approximately 15 degrees +/- of desired set temperature
Made for small to medium size smokers.
We also have sell a 12" version made for medium to larger smokers, please check our other listings.
Specifications:
Holds up to 20 Pounds of Pellets.
Black powder coated steel construction.
Has pellet dump on back for easy switching of pellet flavors.
Includes Mounts for rolling up power cord on back.
Works on 110/120 volt.
Standard 4 Bolt Mounting Pattern (Approx. 8 inches horizontally 5 inches vertically)
Also comes with Grommet Hinged Lid System Over the Pellet Hopper to cover pellets.
Use your grill at least 6 feet away from any wall or surface. Use your grill at least 6 feet away from combustible objects that can melt or catch fire such as vinyl or wood siding, fences and overhangs or sources of ignition including pilot lights on water heaters and live electrical appliances. This appliance is designed for outdoor use only. Never use your grill in a building, garage, porch, shed, breezeway or any other enclosed area. This product can cause property damage and harm to you or possibly death. Please use with caution and discretion, as it could cause damage/injury if not handled with respect and care. This unit is a real fire and real barbecue, treat it accordingly. Direct igniter is not liable for any damage, injury, or death caused by this product or its use. please use at your own risk responsibly.
Weight: 34 Pounds
Dimensions of Hopper Assembly Kit:
Insert Dimensions (Size of hole needed to insert assembly): Height: 4" Width: Approximately 5.25"
Depth of Hopper Insertion into Desired Pit is Approximately: 18" to center of fire pot.
Shipping:
Shipping Weight: 34 Pounds
Shipping Dimensions: 34" x 13" x 21"
Standard Ups or FedEx Ground
Approximately 5 Day
WARRANTY:
1 Year Manufacturer Warranty
Warranty Cover All Defects in Workmanship and Craftsmanship.
Buyer Is Responsible for All Shipping Charges on Warranty Claims.
If you have any question about this or any product feel free to email us.
Thank you.
PROUD USA COMPANY